VLSI TECHNICAL INTERVIEW QUESTIONS & ANSWERS PART -2
Bonus Tips 1)In the process of the they try to ask you about piratical work you had done so my suggestion is do basic work on the on the project that you mentioned in your resume 2)Have a grip on the vlsi design flow and you should each and every thing right from the beginning. 3)test your self before going to the interview so that you can know about your self. 4) if you are backend developer (physical design) then be strong in layouts and designing of them INTERVIEW QUESTION: 22 ) What is glitch? What causes it (explain with waveform)? How to overcome it? The following figure shows a synchronous alternative to the gated clock using a data path. The flip-flop is clocked at every clock cycle and the data path is controlled by an enable. When the enable is Low, the multiplexer feeds the output of the register back on itself. When the enable is High, new data is fed to the flip-flop and the register changes its state 23) What is difference between latch and flipflo...